Professional tool for washing and testing of sanitary circuits, heating, drinking water and drain cleaning according to the technical requirements of the standards EN806, UNI 1988-2 and UNI 9182. Max. Pressure 12 bar - Flushing Pressure 0 - 8 bar - Water flow Max 6 m3/h - Pressure test from 0 up to 12 bar -Accuracy testing100 mbar - Air connections 1/4'' - Pneum. - Water connections 3/4'' - Diameter drains from 21 to 170mm - Air suction 205 L/min - Supply 230 V 50Hz 1500W - Tests saved: last 255 tests- Weight 21,5 Kg - Dimensions 440 x 300 x 650 mm

Multifunctional filling and washing system.
Weight: 30Kg - Dimensions: 1000 x 450 x 500 mm - max capacity: 60 L/min - max pressure: 7 bar - tank capacity: 50 L - water connection: 3/4'' - supply: 230 V-50 Hz - Current: 5,2 A - power: 750 W - 70 dBA sound pressure - protection: IP55.
Handy and easy to use, with chassis designed with the FEM method pneumatic wheels, couplers and control panel ordered, rule of calculation for mixing and gauge.
The machine unlike SOLAR SYSTEM does not have non-return valve, filter and additional attacks per output / measurement pressure and additional suction.

Portable Tri-stand Chain Vise, excellent for quick and easy bending of 3/8"- 1/2" - 3/4" pipes.
Pipe diameter: 1/8'' - 6'' (10 - 168 mm)
Integral folding legs for easy transport and setup, tool hangers and a base which overhangs the front legs for clear tool swing.
Large vise base overhangs; Crank handle is anchored to base. Larger work surface.
Weight: 20 kg
Dimensions: 2 packages - 100x20x20 cm - 40x40x20 cm

Additional Flushing Module for Solar and Tsunami models.
The turbulent motion of the cleaning liquid in the circuits exerts a mechanical action and accelerates the chemical reactions. To obtain the speed sufficient to generate fluid turbulence is thus fundamental a high flow rate, for a small installations suggest at least 40 L/min, preferable 60L/min or more. In the presence of dirt are created bottlenecks: for this it is important to reverse the flow and especially recommeneded pressure to counter the loss of pressure.

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.
MGF product.

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.
MGF product

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.
MGF product.

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.
MGF product.

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.
MGF product

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.
MGF product.

Insert for standard and MINI insert holder jaws, compatible with MGF and Klauke jaws.
Produced in steel worked with numerical control and tempered machines.
With centering seat for perfect pressing, it makes your jaw set light and cost saving.

Max diameter: 6"
Equipped with a compact handle to exercise a secure grip on the tube.
Rubberized tape for maximum grip and minimum failures even in cold and humid environments
Innovative locking system for applications allows you to quickly adjust the size
Provides maximum leverage in confined spaces and can be used in pairs for complex installations

Max diameter: 4 "
Equipped with a compact handle to exercise a secure grip on the tube.
Rubberized tape for maximum grip and minimum failures even in cold and humid environments
Innovative locking system for applications allows you to quickly adjust the size
Provides maximum leverage in confined spaces and can be used in pairs for complex installations

Gas leak detector that adopts LSI technique and meets international smart technology standards. It detects gas leakage with high sensitivity and strong adaptive ability. Being waterproof, dustproof, explosion-proof, and easy to use with high reliability, the detector is widely used in oil, coal, municipal construction, chemical engineering, environmental protection, metallurgy, refining, gas transmission and distribution, biochemistry, agriculture, pharmaceutical industries.
Detected gases: Methane, natural gas, coal gas, ethane, propane, buthane, n-buthane, isobuthane..., alchools (methanol, ethanol, propanol), ethers, kethones (butanone, acethone), hydrogen and other compounds (gasoline), aviation fuel, kerosene, mixture of nitrogen and hydrogen (azohydro), R32, R290 ...
Power Supply: Li-Ion Batteries (batteries and battery charger included) and battery life 6-8 h
Dimensions: 210 x 66 x 30 mm - Weight 0,30 Kg
Pre Heating Time 60s
Working condition Temperature: -10～40 ℃
Sensibility 0-10000 ppm
LCD display for professional leak detection e alarm setting
Storage condition Temperature: -20～50 ℃

This Programmable Refrigerant Scale SMART allows quick, efficient and automatic charging/recovery of refrigerant from air conditioning or refrigerant systems. The unit is portable and has a weight capacity of up to 220 lbs or 100 kg. It includes 1/4” male flare and 1/2’’ ACME fittings to allow connection to all standard charging manifolds and refrigerant cylinders.
High visibility LCD display.
Three units of measure options (kg/oz/lbs)
Backlight for the display.
Automatic Shut-off after 10 minutes of non-use; backlight will shut off after 3 minutes of non-use or use
Memory feature allows storage of up to 100 charge/ recovery programs.
Compact, portable and battery-powered design (included)
Fail safe feature: Unit is designed with a fail safe feature that will close the valve in the event of lost power due to low battery voltage or if the unit is inadvertently turned off.
“FULL”display when the weight exceeds the specified range.

Technical Specifications
Capacity: 220 lbs / 100 Kg
Resolution: ±0.2 oz / 0.01 lbs / 5g
Operating temperature range: 32°F to 122°F / 0°C ~ 50°C
Storage temperature range: +4°F to 158°F / -20°C ~ 70°C
Accuracy: ±0,5% of reading
Platform size: 23 x 23 cm
Total unit weight: 3,6 Kg

Digital refrigerant scale MAXI utilize the most technologically advanced refrigerant meter today and are ideal for HVAC and refrigeration
systems. The weight can be measured in standard or metric units. The units have a built in alarm to indicate the measurement has been exceeded.
High-visibility LCD display.
Three units of measure options (kg/oz/lbs)
Backlight for the display.
Automatic Shut-off after 10 minutes of non-use; backlight will shut off after 3 minutes of non-use or use.
Compact, portable, battery operated design.
"FULL”display when the weight exceeds the specified range.

Technical S pecifications
Capacity: 220 lbs / 100 Kg
Resolution: ±0.2 oz / 0.01 lbs / 5g
Operating temperature range: 32°F to 122°F / 0°C ~ 50°C
Storage temperature range: +4°F to 158°F / -20°C ~ 70°C
Accuracy: ±0,5% of reading
Platform size: 23 x 23 cm
Total unit weight: 3,3 Kg

Simple to use: a single knob for all operations
Refrigerants: R12, R134a, R401, R406, R500, R22, R401, R402, R407D, R408, R409, R411, R412, R502, R509, R402, R404, R407B, R410A, R507, R32 and R1234yf
Vuoto finale: 500mbar (15'' Hg)
Voltage: 230VAC 50Hz
Motor: 3/4HP (560W) single cylinder
Max current draw: 4A
Recovery rate: 6,3Kg/min (push/pull)
Internal pressure protector: the system will shut-off automatically at 38.5 bars

Simple to use: a single knob for all operations
Refrigerants: R12, R134a, R401, R406, R500, R22, R401, R402, R407D, R408, R409, R411, R412, R502, R509, R402, R404, R407B, R410A, R507, R32 and R1234yf
Final vacuum : 500mbar (15'' Hg)
Voltage: 230VAC 50Hz
Motor: 1HP (750W) twin-cylinder
Max current draw: 5A
Recovery rate: 9,50Kg/min (push/pull)
Internal pressure protector: the system will shut-off automatically at 38.5 bars

Friction limit switch system.
Eccentric cone ground.
Locking screws.
Suppliend in blister.
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8" e 3/4"
Weight: 1,68 Kg